Analog Input Module (for DH1) - Ideal for Integrating Analog Inputs to the DH1 Base Unit Gateway.

The OleumTech® Analog Input Module is designed for easily adding four high resolution analog inputs (24-bit ADC) to the DH1 Base Unit Wireless Gateway. Each input can be independently selected for either 0-10 V or 4-20 mA mode of operation.

Analog Output Module (for DH1) - Ideal for Integrating Analog Outputs to the DH1 Base Unit Gateway.

The OleumTech® Analog Output Module is designed for easily implementing four analog outputs to the DH1 Base Unit Wireless Gateway. Each input can be independently selected for either 1-5 VDC (3-wire) or 4-20 mA (2-wire) mode of operation.

DH1 Wireless Gateway - Wireless Gateway with Multiple Serial Interface and Onboard I/O

The OleumTech® DH1 Base Unit Wireless Gateway plays an instrumental role in the OTC Sensor Network by wirelessly collecting critical process data from OTC nodes including Transmitters, I/O Modules, and other Gateways and storing the values in its 320-point Modbus register holding table. It also has the ability to generate output commands to onboard digital outputs. The DH1 is equipped with onboard I/O comprised of 4x analog inputs (0-5 VDC), 2x discrete inputs, and 2x discrete outputs.

DH2 Wireless Gateway - Wireless Gateway with Serial Interface.

The OleumTech® DH2 Wireless Gateway plays an instrumental role in the OTC Sensor Network by wirelessly collecting critical process data from OTC nodes including Transmitters, I/O Modules, and other Gateways and storing them in its 1920-point Modbus register holding table. It also has the ability to carry out output commands to mapped outputs points.

DH3 Wireless Gateway - Highly Versatile Wireless Gateway with Ethernet and Serial Interface.

The OleumTech® DH3 Wireless Gateway plays an instrumental role in the OTC Sensor Network by wirelessly collecting critical process data from OTC nodes including Transmitters, I/O Modules, and other Gateways and storing the values in its 1920-point Modbus register holding table. It also has the ability to carry out output commands to mapped outputs points.

Digital I/O Module (for DH1) - Digital I/O Expansion Solution for the DH1 Base Unit Gateway.

The OleumTech® Digital I/O Module is designed for easily expanding discrete inputs and outputs to the DH1 Base Unit Wireless Gateway. Each channel can be independently software-configured as input, counter, output, or pulsed output. The Module supports any mix of inputs and outputs.

IO Max (MX1) - The Most Flexible, Self-Contained Multi-I/O Wireless Transmitter.

IO MAX is one of many Wireless Transmitters that communicates with an OleumTech Wireless Gateway within its network, creating a highly scalable network, accommodating virtually any I/O requirement.

RTD Transmitter (RT1 & RT2) - Highly Reliable, Accurate Wireless Temperature Sensor/Transmitter.

RT1 & RT2 are ideal for monitoring air, gas, water, or liquid temperatures with high accuracy of ±0.1 °C. The RT1 direct mount version includes a 4-wire Platinum 100 ohm sensor where users can select the length ranging from 2 to 18 inches. It supports temperature ranging from -65 °F to 500 °F (-55 °C to 260 °C).

SCADADROID R2 Alarm Dialer

SCADADroid is easily configured to use VPN to allow quick and easy remote communications. Once connected, the SCADADroid is accessible for viewing and collecting data remotely, such as on a SCADA system. Remote programming and troubleshooting of PLCs is also possible, potentially eliminating travel time for enhancements, diagnostics and correction of programming issues. On alarm condition the ScadaDroid can be set up to phone, text or email you notifications.

Wireless Analog Input Module -Fast Commissioning Wireless Analog Signal Monitoring Solution

The OleumTech® Wireless Analog Input Module is designed to monitor analog processes without trenching or running conduit and wiring for fast commissioning. This Module provides a quick and scalable solution for adding analog input points in any OTC Sensor Network.

Wireless Analog Pressure (JP4) - Wireless Pressure Transmitter with 4 Pressure Sensor Inputs.

The JP4 is designed for connecting up to four 0-5 VDC analog pressure sensors and providing high resolution 24-bit analog to digital conversion (ADC). The Transmitter provides up to 9.5 VDC to each analog output source. The Transmitter relies on power from a replaceable battery. The system is engineered to achieve maximum battery life, providing +10 years of life from a single battery.

Wireless Analog/Discrete (AD1) - Wireless Pressure Gauge Transmitter with 3 Analog and 1 Discrete Inputs.

The OleumTech® AD1 Wireless Pressure Gauge Transmitter is designed for connecting up to three 0-5 VDC pressure gauges or analog sensors, providing high resolution 24-bit analog to digital conversion (ADC). The Transmitter provides up to 9.5 VDC to each analog output source. The AD1 has the ability of calibrating zero and max points. It provides removable wiring terminal blocks in its junction box housing to facilitate the wiring process.

Wireless Digital I/O Module - Fast Commissioning Wireless Digital I/O Solution

The OleumTech® Wireless Digital I/O Module is designed to accommodate various input and output signal needs without permitting, trenching or running conduit for fast commissioning. This Module provides a quick and scalable solution for expanding digital I/O points in any OTC Sensor Network. The Digital I/O Module supports any mix of inputs and outputs with six digital channels that can be independently configure via BreeZ® Software.

Wireless Discrete (DS1) -Fast Commissioning, Wireless Exception Reporting Solution.

The OleumTech® Wireless Discrete Transmitter with local display features two discrete (digital) inputs for connecting to a dry contact or open-drain output/NPN source for notifying state changes. This input can be set for normally open or normally closed. The Transmitter can also report transition counts. The DS1 utilizes on-delay exception reporting method and users can set the debounce filter ranging from 20 ms to 2000 ms to control just when the state change occurs.

Wireless Flow Totalizer (FT1) - Highly Accurate Self-Contained Wireless Flow Measurement Solution.

The OleumTech® FT1 Wireless Flow Totalizer Transmitter is designed to work with virtually any third-party flow turbine meters for accumulating volume of liquid with high accuracy of ±0.01 %. Users have the ability to set the contract hour and set the flow rate to per second, minute, hour, or day. Users can also match the k factor and k factor units and display the volume output in barrels, liters, gallons, or cubic meters.

Wireless Multi-I/O Module - Ultimate Wireless I/O Solution with Modbus Master Function

The OleumTech® Wireless Multi-I/O Module is designed to solve various input and output signal challenges without trenching or running conduit and wiring for fast commissioning. This Module provides a quick and scalable solution for expanding digital I/O points in any OTC Sensor Network. This Multi-I/O Module is equipped with four high resolution analog inputs (24-bit ADC). Each input can be independently selected for either 0-10 V or 4-20 mA mode of operation.