AVFM 6.1 Area-Velocity Flow Monitor

Measure flow through partially filled pipes, channels, canals and turnouts without a flume or weir. Ideal for wastewater, stormwater, effluent, industrial wastewater and irrigation water. Configuration is simple: enter the pipe diameter or channel shape and the AVFM 6.1 computes the flow volume and displays the flow rate. Measure forward and reverse flow and calibrate to channels of any shape.

Blackbox 130

Blackbox 130 is a compact low-cost intelligent controller that offers non-contacting level measurement. The Blackbox 130 features a 4-20mA output, which can be supplied isolated or non-isolated, proportional to level and two alarm or control relays.

DFM 6.1 Doppler Flow Meter

Designed for "difficult liquids" that would damage regular flow meters - wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop. The non-intrusive, clamp-on ultrasonic sensor fits any pipe 1/2" (12.5 mm) Inside Diameter or larger. The DFM 6.1 features enhanced performance in a wide range of applications. Improved industrial noise immunity filters potential interference souces.

DLT 2.0 Differential Level Transmitter

Simple solution for barscreen level control at wastewater treatment plants, headworks, pump stations and combined sewer systems. Install a sensor on each side of mechanical barscreen to continuously monitor, transmit and control level. Built in control relays or 4-20mA outputs automatically activate the barscreen rake at preset levels.

FH83NEO - Ultrasonic Solution for Industrial Liquid Measurement

The Faure Herman FH8300 Neo Ultrasonic Flowmeter is designed to measure both conductive & non-conductive liquids.

MantaRay Portable Area-Velocity Flow Meter

Measures flow in open channels, partially filled and surcharged pipes using an ultrasonic sensor. It's designed for monitoring stormwater, sewage, industrial effluent, irrigation water and natural streams. The MantaRay displays and datalogs flow rate and total flow and connects to samplers, SCADA and telemetry systems.

OCF 6.1 Open Channel Flow Monitor

The Greyline OCF 6.1 Open Channel Flow & Tank Level Meter is a perfect solution for your non-contacting measurement needs. New features of the OCF 6.1, replacing the OCF 5.0 Open Channel Flow Meter and SLT 5.0 Level Tank Monitor. Continuously monitor, display, totalize and data log flow and level through any flume or weir.

PDFM 5.1 Portable Doppler Flow Meter

It's ideal for flow troubleshooting, balancing and checking performance of permanent flow meters. Fast and easy to operate – you can mount the sensor on the outside of a pipe in less than a minute. Works on any liquid containing bubbles or solids and is recommended for "difficult liquids" like wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. Learn more...

PTFM 6.1 Portable Ultrasonic Transit Time Flow Meter

With New, more powerful signal processing hardware, and three interchangeable, non-invasive transducer sizes optimized for a wide range of pipe sizes and materials. The PTFM 6.1 from Pulsar is here to help by providing accurate, non-invasive flow measurement in the most challenging industrial environments and applications, with minimal installation complexity and costs.

Pulsar Guard

The Pulsar Guard acoustic sensor range offers reliable solids flow detection. It detects and reacts instantly to changes in solids flow and warns of blockages and foreign object detection, high flow, low flow or no flow conditions and can detect pigs within the process.

SFM 6.1 Ultrasonic Slurry Flow Meter

Non-contacting flow monitoring specifically designed for limestone slurry, fly ash slurry, gypsum slurry and many others. The Sensor is mounted on the outside of the pipe so it is unaffected by abrasive slurries or harsh chemicals. There is no obstruction to flow and no pressure drop.

Sludge Finder 2

Pulsar’s Sludge Finder 2 is a controller and transducer system that provides reliable continuous sludge blanket level measurement. Used in thousands of applications worldwide for detecting sludge blanket levels or settlement tanks.

Stingray 2.0 Portable Level-Velocity Logger

For flow surveys in open channels and partially filled pipes. The sealed ultrasonic sensor mounts on the bottom of the pipe or channel. Stingray operates on standard Alkaline D-cell batteries for up to four years. The built in 130,000 point datalogger stores level, velocity and temperature readings at programmable intervals. Logger software included.

TTFM 6.1 Transit Time Flow Meter

Accurately measure the flow rate of relatively clean, non-aerated liquids like potable water, raw water, cooling water, de-ionized or reverse-osmosis water, oils and chemicals in full pipes. Ultrasonic transducers mount on the outside of a pipe without shutting down flow. Flow rate is displayed on the large, backlit display, along with total volume, signal strength, relay status, and other diagnostic values.

Ultra 5

Ultra 5 provides flexible and reliable non-contacting ultrasonic level and volume measurement. Featuring five control relays and a measurement range from 125mm to 40m. Available as a wall, panel, fascia or 19" rack mount.

UltraTWIN

UltraTWIN Twin-channel ultrasonic measurement with the ability to combine applications. Compatiable with the full range of dB Transducers. UltraTWIN features six relays configurable to either channel.