Easidew PRO XP - Explosion Proof Moisture Transmitter
The Michell Easidew PRO XP transmitter is designed to reliably and accurately measure dew point or moisture content in a wide variety of gas or liquid process applications. The robust mechanical design minimizes installation time and provides a robust and reliable transmitter for all global explosion and flameproof applications.
Electromagnetic Flow Meter
OleumTech's H Series Electromagnetic Flow Meter, bi-directional flow measurement is independent of fluid density, viscosity, temperature, pressure, and conductivity. Provides best-in-class seamless PTFE lining material, with two measuring points inside the meter with no moving parts to eliminate pressure drop.
RS485 Modbus Flow Totalizer
OleumTech's RS485 Modbus Flow Totalizer, is designed to work with virtually any third-party turbine flow meter, measuring accumulated flow rates and volume. The HW5000-FT1 Flow Totalizer is certified for use in Class I, Division 1 (Zone 0) hazardous locations, and can be serviced without being removed from the process.
Analog Pressure (JP4) Transmitter
The JP4 is designed for connecting up to four 0-5 VDC analog pressure sensors and providing high resolution 24-bit analog to digital conversion (ADC). The Transmitter provides up to 9.5 VDC to each analog output source. The Transmitter relies on power from a replaceable battery. The system is engineered to achieve maximum battery life, providing +10 years of life from a single battery.
AVFM 6.1 Area-Velocity Flow Monitor
Measure flow through partially filled pipes, channels, canals and turnouts without a flume or weir. Ideal for wastewater, stormwater, effluent, industrial wastewater and irrigation water. Configuration is simple: enter the pipe diameter or channel shape and the AVFM 6.1 computes the flow volume and displays the flow rate. Measure forward and reverse flow and calibrate to channels of any shape.
Blackbox 130
Blackbox 130 is a compact low-cost intelligent controller that offers non-contacting level measurement. The Blackbox 130 features a 4-20mA output, which can be supplied isolated or non-isolated, proportional to level and two alarm or control relays.
CDS1000 Cryogenic Monitor
Turbines, Inc.’s Cryogenic Totalizer Model CDS1000 accurately computes and displays in real-time actual flow parameters in real-time in both digital and graphic formats.The monitor comes with a wealth of standard features, including Bluetooth wireless printer interface, selectable engineering units. It is programmable via front keyboard and continuously corrects measured volume as product temperature changes
dBi HART Transducer Series
The Pulsar dBi HART Transducer Series are a range of self-contained, intelligent non-contacting ultrasonic level measurement transducers which make use of HART communication protocols to make plant integration simple. Four range choices are available with either 3m, 6m, 10m or 15m range (10ft,
20ft, 33ft or 49ft).
dBi PROFIBUS Transducer Series
The Pulsar dBi Profibus PA Transducer Series are a range of self-contained, intelligent non-contacting ultrasonic level measurement transducers which make use of Profibus PA communication protocols. Four range choices are available with either 3m, 6m, 10m, or 15m rnage (10ft, 20ft, 33ft or 49ft), all of which take simplicity, convenience and accuracy to a new level.
DFM 6.1 Doppler Flow Meter
Designed for "difficult liquids" that would damage regular flow meters - wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop. The non-intrusive, clamp-on ultrasonic sensor fits any pipe 1/2" (12.5 mm) Inside Diameter or larger. The DFM 6.1 features enhanced performance in a wide range of applications. Improved industrial noise immunity filters potential interference souces.
DFS 5.1 Doppler Flow Switch
The DFS5.1 Clamp-on Flow Sensor installs without cutting the pipe. The sensor continuously injects high frequency sound through the pipe wall and into the moving fluid where acoustic pulses are reflected back to the sensor from particles or bubbles in the fluid. The unit includes On and Off relay set-points and time delay options with LED bargraph for flowrate.
Differential Pressure Transmitter
OleumTech's H Series, Differential Pressure Transmitter is a high-performance instrument utilizing the world's most advanced monocrystalline silicon pressure sensor and patented encapsulation technology. The Differential Pressure Transmitter is easy to install and operate. It can be ordered with a variety of options to fit your specific needs.
DLT 2.0 Differential Level Transmitter
Simple solution for barscreen level control at wastewater treatment plants, headworks, pump stations and combined sewer systems. Install a sensor on each side of mechanical barscreen to continuously monitor, transmit and control level. Built in control relays or 4-20mA outputs automatically activate the barscreen rake at preset levels.
Easidew PRO I.S - Transmitter for Moisture Analysis
The Micehll Easidew PRO I.S. transmitter is a reliable and accurate 2-wire dew-point transmitter for trace moisture measurement in a wide range of gas and liquid process applications. Tough and durable, with global certifications and approvals, it is suitable for natural gas, petrochemical and refinery applications.
FH83NEO - Ultrasonic Solution for Industrial Liquid Measurement
The Faure Herman FH8300 Neo Ultrasonic Flowmeter is designed to measure both conductive & non-conductive liquids.
Flow Totalizer (FT1)
OleumTech's FT1 Wireless Flow Totalizer Transmitter is designed to work with virtually any third-party flow turbine meters for accumulating volume of liquid with high accuracy of ±0.01 %. Users have the ability to set the contract hour and set the flow rate to per second, minute, hour, or day. Users can also match the k factor and k factor units and display the volume output in barrels, liters, gallons, or cubic meters.
FlowCERT-Open Channel Flow Meter
The FlowCERT open channel flow meter provides comprehensive flow monitoring with data logging and control functions. It is compatible with a range of sensors to create a flow metering system for any application.
FML250 Liquid Flow Monitor
Designed specifically for liquid applications to accurately compute and display actual flow parameters. FML250 monitor is front keypad programmable, features an LCD display, and allows for 2-40 point linearization for enhanced metering accuracy
HA Series Turbine Flow Meter
Our High Accuracy turbine flow meters are built with extremely tight tolerances only achievable with our precision manufacturing processes, stringent quality control, and in-house calibration capabilities. Specifically engineered to meet the strict standards required for custody transfer, the High Accuracy Meter delivers +/- 0.5% or better accuracy and +/- 0.1% repeatability for low viscosity applications.
HELIFLU™ TCX Turbine Flowmeter, Process Measurement for Light to Medium Viscosity
The HELIFLU™ TCX product line covers a wide range of applications and is suitable for process and fiscal metering applications (with an accuracy range from +/- 0.15% to +/-0.50% and a viscosity range from 0.2 to 75 cSt).
HELIFLU™ TLM The Compact Helical Turbine Flow Meter for Liquid Hydrocarbon Measurement
The Heliflu™ TLM flowmeter is designed for high accuracy measurement of low to medium viscosity liquids and refined products. Meter installations and custody transfer operations are improved by the unique weight and space saving design which includes integrated flow conditioning.
HF5 - High End Humidity Transmitter
The Rotronic HygroFlex5 series is compatible with HC2A probes which offers a high variety in temperature ranges, accuracy and body types. This device generation boasts a unique calibration and adjustment process, as well as many other useful innovations. The HF5 Humidity and Temperature Transmitters are available as wall and duct mount versions.
HF5-EX - ATEX Humidity and Temperature Transmitter
The Rotronic HygroFlex5-EX series consists of two-channel transmitters for the exact measurement of humidity and temperature in explosive atmospheres. This device conforms to the latest international standards, the robust aluminum HF5-EX humidity and temperature transmitters are available with or without display. The attached probes are cast into a stainless steel tube and are certified for operation in explosive atmospheres.
HP Series Turbine Flow Meter
The HP Series: High Pressure Liquid Turbine Flow Meter offers all stainless steel precision machined components with CD4MCu and/or 416 stainless steel rotor.
HygroPalm HP31 | HP32 - Handheld Device
The Rotroinic HygroPalm HP32 is a versatile handheld instrument compatible with all HC2A and HC2 probes, it is able to perform spot measurements and logging of relative humidity, temperature and psychrometric parameters.
IMP Lite Ultrasonic level sensor
IMP Lite Lower-cost alternative to IMP+ for level measurement. Just like the IMP+, the IMP lite can be used wherever a reliable non-contacting ultrasonic level measurement and digital echo processing is needed. Also, recomnded for for slurries or liquids. Analogue output to interface with site control system or drive a display.
IMP Ultrasonic level sensor
IMP can be used wherever reliable non-contacting ultrasonic level measurement and digital echo processing is needed. IMP is recommended for slurries or liquids. Analogue output to interface with site control system or drive a display.
Installed SLGM0200L Slim Line Meter
The SLGM Series turbine flow meter delivers accurate measurement in a variety of applications, including oil & gas. This durable, compact design meter is specifically engineered to withstand rugged conditions and delivers accurate results while sustaining the same long service life as our full-sized turbine meters.The SLGM Series is a specialized slim design meter that allows for the removal of all internal parts as a single unit. Designed for installation between two flanges, the SLGM Series utilizes a significantly more robust rotor and support assembly than those found in competing products. The SLGM Series can be flexibly positioned in a variety of thin line piping applications and delivers +/- 1.0% standard accuracy over the flow range.
ISM 5.0 Insertion Magmeter
The Accurate, Low Cost Alternative to Full-bore Magnetic Flow Meters. Measure flow of water and conductive liquids in full pipes from 3 to 72" (80 to 1800 mm) diameter. The dual pair electrode sensor inserts through a tap in the pipe wall. It can be easily installed in new pipe systems or by hot tap in pressurized pipes with flowing liquids. There are no moving parts so obstruction to flow and pressure drop is minimal.
LCMag Electromagnetic Flow Meters
The LCMag family of electromagnetic flow meters offers the best solution for measuring the flow of electrically conductive liquids (5µS/cm minimum). The sensor consists of a stainless steel pipe section internally lined with insulating material. PTFE, Polypropylene and Ebonite (hard rubber) liners are available.
LectroCount Electronic Register
LectroCount® is Liquid Controls’ series of electronic registers that replaces the mechanical register, calibration gears and/ or adjuster mechanism traditionally used on many flow meters. The LectroCount® series are Weights & Measures (custody transfer) approved advanced microprocessor based electronic register.
LIT25 Level Indicating Transmitter
The LIT25 continuously measures, displays, and transmits level in tanks and lagoons, or anywhere you require a level sensor. Includes a non-contacting ultrasonic sensor which is rated Intrinsically safe, a compact watertight electronics/display enclosure, 4-20mA output, backlit LCD display, control relay and simple built-in menu/calibration system.
MantaRay Portable Area-Velocity Flow Meter
Measures flow in open channels, partially filled and surcharged pipes using an ultrasonic sensor. It's designed for monitoring stormwater, sewage, industrial effluent, irrigation water and natural streams. The MantaRay displays and datalogs flow rate and total flow and connects to samplers, SCADA and telemetry systems.
Multivariable Transmitter
OleumTech's H Series Multivariable Transmitter is a versatile 3-in-1 instrument designed to deliver precise measurements of both differential and static absolute pressure (high side) along with process temperature through an external PT100 ohm RTD sensor (4-wire). The MVS Transmitter supports RS485 Modbus and is easy to install and operate since it effortlessly integrates with popular third-party flow computers.
OCF 6.1 Open Channel Flow Monitor
The Greyline OCF 6.1 Open Channel Flow & Tank Level Meter is a perfect solution for your non-contacting measurement needs. New features of the OCF 6.1, replacing the OCF 5.0 Open Channel Flow Meter and SLT 5.0 Level Tank Monitor. Continuously monitor, display, totalize and data log flow and level through any flume or weir.
OTC Wireless Hydrostatic Level Transmitters
Level Transmitters measure level by monitoring pressure at the bottom point of vented top mount tanks, deep wells, water towers, rivers, and lakes. WT-LL4 direct mount version includes a specified length hydrostatic pressure sensor and direct mounting solution while the WT-LL5 allows users to select their own sensor and mounting method.
PD663 ProtEX-Lite EXPLOSION-PROOF LOOP-POWERED METER
The PD663 is a rugged, explosion-proof NEMA 4X loop-powered meter perfect for applications where a simple, inexpensive display is required in a hazardous area. Power is derived soley from the 4-20 mA loop meaning that there is no need for additional wiring or batteries that need to be changed.
PD6830 ProtEX-RTP PULSE INPUT RATE/TOTALIZER
The ProtEX-RTP PD6830 Explosion-Proof Rate/Totalizer brings modern design, easy readability, and enhanced functionality to hazardous areas in a way never seen before. The PD6830 meter has a display that provides the important information about the process, can be seen under various lighting conditions, from wide angles, and from a distance.
PDFM 6.1 Portable Doppler Flow Meter
Portable Doppler Flow Meter provides fast, accurate, non-invasive flow measurement for the most challenging industrial environments and mediums. With more advanced signal processing, a low-power mode for extended flow logging applications. A rugged IP67 extruded aluminum enclosure, the PDFM 6.1 is the right choice for your next immediate or long-term flow measurement application for fluids with solids and undissolved gases present, like raw sewage, aerated water, viscous liquids, slurries, and abrasives.
Positive Displacement Flow Meters and Accessories
Liquid Controls is a world renowned supplier of reliable, high-accuracy, positive displacement (PD) metering systems. Whether your business requires flow measurement for custody transfer or process control, with an LC PD meter on your delivery vehicle, at your bulk shipping facility, or at your plant, you’ll get years of consistently accurate, trouble-free service.
PSL 5.0 Hybrid Pump Station Level Controller
Designed for pump stations, wet wells and tank level control, the Greyline PSL5.0 includes 6 control relays for pump control, alternation, level alarms, dialers or fault alarms. It features a non-contacting ultrasonic level sensor plus redundant sensing with connection of any 4-20mA level sensor. The PSL5.0 automatically stores relay run time reports for pump performance.
PTFM 6.1 Portable Ultrasonic Transit Time Flow Meter
With New, more powerful signal processing hardware, and three interchangeable, non-invasive transducer sizes optimized for a wide range of pipe sizes and materials. The PTFM 6.1 from Pulsar is here to help by providing accurate, non-invasive flow measurement in the most challenging industrial environments and applications, with minimal installation complexity and costs.
Pulsar Guard
The PulsarGuard series are non-contacting, so they are fastened to the outside of the structure, meaning minimal installation costs and zero shut downtime. The compact design of the sensor means that it can be fitted in the tightest of positions or environments.
QC Series: Quick Change Turbine Flow Meter
The Quick Change Meter allows for quick replacement of the internal components, without the need to remove the entire meter from its installation point – allowing customers to maintain process efficiency and accuracy with minimal downtime, mitigating an opportunity for pipeline shift. The meter’s unique body allows it to handle working pressures up to 1,500 psig.
REFLECT 2-Wire Radar Level Sensor
Provides accurate level or volume monitoring of liquids & solids in critical measurement applications; no routine servicing required, withstand the harshest environments while maintaining accuracy in the presence of dust, temperature, moisture, pressure, & chemicals. The REFLECT™ 2-wire radar sensor uses a web-based app to give an easy & convenient way for you to change parameters, access trend reports, & view echo traces.
RetroFit Kits
All internal components for any series turbine, standard and heavy duty options available to install in the field to avoid costly delays returning meters repair. All kits are calibrated.
RS485 Resistive Tank Level Sensors
OleumTech’s Resistive Level Sensors level monitoring solution that offers industry-leading 5-in-1 monitoring capabilities: product (oil), interface (water), the temperature, along with two discrete inputs for connecting to dry contact sources. HW-RL3-LCD also has the ability to calculate and report volume and tank full percentage data.
RTD (RT1 & RT2) Wireless Temperature Sensor/Transmitter
RT1 & RT2 are ideal for monitoring air, gas, water, or liquid temperatures with high accuracy of ±0.1 °C. The RT1 direct mount version includes a 4-wire Platinum 100 ohm sensor where users can select the length ranging from 2 to 18 inches. It supports temperature ranging from -65 °F to 500 °F (-55 °C to 260 °C).
RTD Temperature Transmitter
The HRTD is ideal for hazardous locations thanks to its Explosion-proof, Class I, Division 1 design. OleumTech's H Series RTD Temperature Transmitter provides high accuracy and stability and is available with either 4-20 mA, 4-20 mA/HART, or RS485 Modbus output signal option while offering IP67 protection.
SFM 6.1 Ultrasonic Slurry Flow Meter
Non-contacting flow monitoring specifically designed for
limestone slurry, fly ash slurry, gypsum slurry and many others. The Sensor is mounted on the outside of the pipe so it is unaffected by abrasive slurries or harsh chemicals. There is no obstruction to flow and no pressure drop.
Sludge Finder 2
Pulsar’s Sludge Finder 2 is a controller and transducer system that provides reliable continuous
sludge blanket level measurement. Used in thousands of applications worldwide for detecting
sludge blanket levels or settlement tanks.
Smart Gauge Pressure Transmitter (HGPT)
Smart Pressure Transmitter is designed for use in rigorous industrial applications with robust resistance to chemical exposures, mechanical loads, and EMI. It is easy to install and operate. The OleumTech H Series Smart Pressure Transmitter is a natural choice for a wide variety of oil, gas, water, wastewater, and other mission-critical applications that require a high level of accuracy and reliability.
Stingray 2.0 Portable Level-Velocity Logger
For flow surveys in open channels and partially filled pipes. The sealed ultrasonic sensor mounts on the bottom of the pipe or channel. Stingray operates on standard Alkaline D-cell batteries for up to four years. The built in 130,000 point datalogger stores level, velocity and temperature readings at programmable intervals. Logger software included.
Tank Level Switch
Float Type Level Switch by OleumTech, is designed to be mounted on the top of a liquid storage tank and is used for detecting critical overfill conditions for high level alarm, monitoring, and control applications. The level switch can be ordered with a single or dual actuation switching option along with customizable set points.
TM Series Turbine Flow Meter
The TM Series features our same ruggedized, stainless steel construction with CD4MCu and/or 416 stainless steel rotors, line sizes from 3/8 inch through 10.0 inch to fit various application requirements. End connection is NPT threaded standard, however victaulic, flanged, or sanitary ends are available.
TMC Series Cryogenic Flow Meters
Upstream and downstream flared transition piping is available for all end fittings. For enhanced accuracy flow straighteners can be installed in the upstream section of pipe.
TMX Corrosive Liquid Flow Meter
Designed specifically for corrosive applications, the TMX Corrosive Series provides highly accurate measurement in rugged conditions, durability and longevity when only the most reliable equipment will suffice.
TTFM 6.1 Transit Time Flow Meter
Accurately measure the flow rate of relatively clean, non-aerated liquids like potable water, raw water, cooling water, de-ionized or reverse-osmosis water, oils and chemicals in full pipes. Ultrasonic transducers mount on the outside of a pipe without shutting down flow. Flow rate is displayed on the large, backlit display, along with total volume, signal strength, relay status, and other diagnostic values.
Tuning Level Switches
OleumTech's H Series Tuning Forks, designed based on the tuning fork principle for providing point level detection for alarm, monitoring, and control applications. When in air, the tuning fork vibrates at its natural frequency, but when immersed in a particular medium, the frequency drops & provides an output state change.
TZN Helical Turbine Flowmeter for Custody Transfer Measurement
TZN provides high accuracy measurement for a variety of liquids, from very light LPG products to heavy crude oil. This Helical Turbine meter design is suitable for use in the most severe environments & process conditions while maintaining accuracy better than plus or minus 0.15%, even in changing solutions. Low pressure drop due to the helical rotor design.
Ultra 4
Ultra 4 offers the sophistication and advanced features of the rest of the Ultra range in a compact, cost-effective package and useful new features. Offering 4 alarm or control relays (3 x SPCO isolated and 1 x SPNO solid state) and a multifunctional display.
Ultra 5
Ultra 5 provides flexible and reliable non-contacting ultrasonic level and volume measurement. Featuring five control relays and a measurement range from 125mm to 40m. Available as a wall, panel, fascia or 19" rack mount.
Ultrasonic dB Transducer Series
The dB Transducer Series is a range of non-contacting ultrasonic transducers for level, volume and flow measurement. Available in a variety of models and compatible with all Pulsar controllers.
UltraTWIN
UltraTWIN Twin-channel ultrasonic measurement with the ability to combine applications. Compatiable with the full range of dB Transducers. UltraTWIN features six relays configurable to either channel.
Wireless Analog/Discrete (AD1)
The OleumTech® AD1 Wireless Pressure Gauge Transmitter is designed for connecting up to three 0-5 VDC pressure gauges or analog sensors, providing high resolution 24-bit analog to digital conversion (ADC). The Transmitter provides up to 9.5 VDC to each analog output source. The AD1 has the ability of calibrating zero and max points. It provides removable wiring terminal blocks in its junction box housing to facilitate the wiring process.
WM Series Turbine Flow Meter
The WM Series: Liquid Wafer Style Turbine Flow Meter offers all stainless steel precision machined components with CD4MCu and/or 416 stainless steel rotors in line sizes from 3/8 inch through 8.0 inch. Wafer-style refers to meters that are installed between existing process piping flanges.
XTC601 - Binary Gas Analyzer for Hydrogen Monitoring
A robust, linear & stable thermal conductivity analyzer for measurement of binary gas mixes such as air in hydrogen, nitrogen, argon, helium or carbon-dioxide. The sensor is housed in a rugged casing, making it suitable for a wide range of applications. The analyzer can be supplied explosion-proof and suitable for hazardous areas.
XTP601 - Oxygen Analyzer
The XTP601 Oxygen Analyzer for safe or hazardous areas is a robust, linear and stable device that is used for measurements in gases such as biogas, methane, hydrogen, nitrogen or carbon dioxide. The analyzer is housed in an IP66 rugged casing, making it suitable for a wide range of applications. The XTP601 can be supplied with flame arrestors, as either explosion-proof and certified for use in hazardous areas or for use with flammable gases in a safe area.
