Easidew PRO XP - Explosion Proof Moisture Transmitter

The Michell Easidew PRO XP transmitter is designed to reliably and accurately measure dew point or moisture content in a wide variety of gas or liquid process applications. The robust mechanical design minimizes installation time and provides a robust and reliable transmitter for all global explosion and flameproof applications.

Electromagnetic Flow Meter

OleumTech's H Series Electromagnetic Flow Meter, bi-directional flow measurement is independent of fluid density, viscosity, temperature, pressure, and conductivity. Provides best-in-class seamless PTFE lining material, with two measuring points inside the meter with no moving parts to eliminate pressure drop.

OTC Wireless High Level Switch Transmitter

The OleumTech® “HL1” High Level Switch Transmitter provides two actuation points for detecting high and high-high liquid level conditions. The transmitter can also report transition counts. This device reports to the Gateway every five minutes. This ultra-low-power transmitter is powered by a replaceable battery pack that provides up to a 10-year life. The push button LCD interface allows for device configuration and instant access to process data.

RS485 Modbus Flow Totalizer

OleumTech's RS485 Modbus Flow Totalizer, is designed to work with virtually any third-party turbine flow meter, measuring accumulated flow rates and volume. The HW5000-FT1 Flow Totalizer is certified for use in Class I, Division 1 (Zone 0) hazardous locations, and can be serviced without being removed from the process.

Wireless High Level Switch Transmitter

OleumTech's “HL2” High Level Switch Transmitter is a side tank mounting solution for detecting high liquid level conditions. The HL2 Transmitter can also report transition counts. The HL2 utilizes on-delay exception reporting method and users can set the debounce filter ranging from 20 ms to 2000 ms to control just when the high level detection occurs.

ABB Soft Starters

Softstarters from ABB offers you several values and benefits; by helping to secure motor reliability, improving installation efficiency and increasing application productivity. Typical full-speed applications include pumps, fans, compressor and conveyors and many others. Softstarters are used to start and stop motors in full-speed applications, eliminating common problems associated with motor starting and stopping.

ACS580 Drive

All-compatible, wall-mounted and cabinet-built drive simplifies your processes and motor control with effortless efficiency. The ACS580 is plug-in ready to control your compressors, conveyors, mixers, pumps, fans and many other variable and constant torque applications.

ACS880 Drive

Compact wall-mounted drives with all important features built-in the drive, saving installation space and time. Control of virtually any type of AC motor with direct torque control (DTC), including permanent magnet motors and synchronous reluctance motors.

Analog Input Module - Analog Inputs to the DH1

The OleumTech® Analog Input Module is designed for easily adding four high resolution analog inputs (24-bit ADC) to the DH1 Base Unit Wireless Gateway. Each input can be independently selected for either 0-10 V or 4-20 mA mode of operation.

Analog Output Module - Analog Outputs to the DH1

The OleumTech® Analog Output Module is designed for easily implementing four analog outputs to the DH1 Base Unit Wireless Gateway. Each input can be independently selected for either 1-5 VDC (3-wire) or 4-20 mA (2-wire) mode of operation.

Analog Pressure (JP4) Transmitter

The JP4 is designed for connecting up to four 0-5 VDC analog pressure sensors and providing high resolution 24-bit analog to digital conversion (ADC). The Transmitter provides up to 9.5 VDC to each analog output source. The Transmitter relies on power from a replaceable battery. The system is engineered to achieve maximum battery life, providing +10 years of life from a single battery.

AVFM 6.1 Area-Velocity Flow Monitor

Measure flow through partially filled pipes, channels, canals and turnouts without a flume or weir. Ideal for wastewater, stormwater, effluent, industrial wastewater and irrigation water. Configuration is simple: enter the pipe diameter or channel shape and the AVFM 6.1 computes the flow volume and displays the flow rate. Measure forward and reverse flow and calibrate to channels of any shape.

BG2 Fire Alarm Call Points

The BG2 Manual Fire Alarm Call Point has been designed for use in flammable atmospheres with harsh environmental conditions. The GRP enclosure is suitable for use offshore or onshore where light weight combined with a high level of corrosion resistance is required.

Blackbox 130

Blackbox 130 is a compact low-cost intelligent controller that offers non-contacting level measurement. The Blackbox 130 features a 4-20mA output, which can be supplied isolated or non-isolated, proportional to level and two alarm or control relays.

C1 Protector Alarm Controller

The C1 Protector Controller provides simultaneous display and alarm functions for up to 16 input channels. A graphic LCD displays data as trends, bargraphs or engineering units. Three adjustable alarm levels per channel with LED indicators are provided. Four common relay outputs allow control of beacons or accessories, discrete options are also available.

C2 Protector Controller

The C2 Quad Four Channel Display / Alarm Controller is designed to provide simultaneous display and alarm functions for four gas detection variables. A graphic LCD displays monitored data as bar graphs and engineering units. Three adjustable alarm levels are provided per channel. Relay outputs or optional 4-20mA outputs allow for alarming conditions.

CDS1000 Cryogenic Monitor

Turbines, Inc.’s Cryogenic Totalizer Model CDS1000 accurately computes and displays in real-time actual flow parameters in real-time in both digital and graphic formats.The monitor comes with a wealth of standard features, including Bluetooth wireless printer interface, selectable engineering units. It is programmable via front keyboard and continuously corrects measured volume as product temperature changes

Combination Units

Combination units are designed to provide audio and visual awareness to an emergency situation. Units are suitable for use in the harsh environmental conditions found offshore and onshore in the oil, gas and petrochemical industries. Combination units can be wired for simultaneous operation or individual operation.

Controller - 8800 Series

The 8800 controller provides simultaneous display & alarm functions for up to 16 input variables. Standard embedded web page; allows easy access to view data and change settings from your web enabled computer, tablet, or phone.

Controllers - 7200 Plus / 7400 Plus Series

Designed to provide simultaneous display and alarm functions for up to four monitored variables. Three adjustable alarm levels are provided per channel. Relay outputs allow control of beacons, horns and other alarm events. The controllers are easy to configure and are user friendly.

CP1 Cathodic Protection Transmitter

OleumTech's CP1 Cathodic Protection Transmitter Kit is designed to help monitor the integrity of a cathodic protection system by monitoring both current and voltage. The CP1 Transmitter provides its users the flexibility of selecting the Current Range: 0-20, 0-40, or 0-80 Amp. It also provides 0-50 Voltage DC input for monitoring cathodic rectifier DC Voltage output.

DB3B Range - HORNS - Up to 115dB

Replacement for the current DB3. For use in a wide range of temperatures from -55ºC to +70ºC, the Ex enclosure is manufactured from GRP with a rugged thermoplastic flare providing a corrosion free and aesthetically pleasing product. Capable of producing 125dB @ 1m and with a range of pre-recorded tones, the DB3B includes an integral volume control which is ideal when a lower output is required.

DB4B Range - Hazardous Area Speaker

Replacement for the DB4 with improved clarity and acoustic performance. Certified for use in a wide range of temperatures (from -55ºC to +70ºC) the Ex enclosure is manufactured from GRP with a rugged thermoplastic flare providing a corrosion free and lightweight product. The frequency response of the unit ensures that critical voice messages and general alarm tones are highly intelligible.

dBi HART Transducer Series

The Pulsar dBi HART Transducer Series are a range of self-contained, intelligent non-contacting ultrasonic level measurement transducers which make use of HART communication protocols to make plant integration simple. Four range choices are available with either 3m, 6m, 10m or 15m range (10ft, 20ft, 33ft or 49ft).

dBi PROFIBUS Transducer Series

The Pulsar dBi Profibus PA Transducer Series are a range of self-contained, intelligent non-contacting ultrasonic level measurement transducers which make use of Profibus PA communication protocols. Four range choices are available with either 3m, 6m, 10m, or 15m rnage (10ft, 20ft, 33ft or 49ft), all of which take simplicity, convenience and accuracy to a new level.

DFM 6.1 Doppler Flow Meter

Designed for "difficult liquids" that would damage regular flow meters - wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop. The non-intrusive, clamp-on ultrasonic sensor fits any pipe 1/2" (12.5 mm) Inside Diameter or larger. The DFM 6.1 features enhanced performance in a wide range of applications. Improved industrial noise immunity filters potential interference souces.

DFS 5.1 Doppler Flow Switch

The DFS5.1 Clamp-on Flow Sensor installs without cutting the pipe. The sensor continuously injects high frequency sound through the pipe wall and into the moving fluid where acoustic pulses are reflected back to the sensor from particles or bubbles in the fluid. The unit includes On and Off relay set-points and time delay options with LED bargraph for flowrate.

DH1 Wireless Gateway (Base Unit)

OleumTech's DH1 Base Unit Wireless Gateway plays an instrumental role in the OTC Sensor Network by wirelessly collecting critical process data from OTC nodes including Transmitters, I/O Modules, and other Gateways. The gateways have the ability to communicate with one another.

DH2 Wireless Gateway

OleumTech's DH2 Wireless Gateway, plays an instrumental role in the OTC Sensor Network by wirelessly collecting critical process data from OTC nodes including Transmitters, I/O Modules, and other Gateways and storing them in its 1920-point Modbus register holding table. It also has the ability to carry out output commands to mapped outputs points.

DH3 Highly Versatile Wireless Gateway

The OleumTech® DH3 Wireless Gateway plays an instrumental role in the OTC Sensor Network by wirelessly collecting critical process data from OTC nodes including Transmitters, I/O Modules, and other Gateways and storing the values in its 1920-point Modbus register holding table. It also has the ability to carry out output commands to mapped outputs points.

Differential Pressure Transmitter

OleumTech's H Series, Differential Pressure Transmitter is a high-performance instrument utilizing the world's most advanced monocrystalline silicon pressure sensor and patented encapsulation technology. The Differential Pressure Transmitter is easy to install and operate. It can be ordered with a variety of options to fit your specific needs.

Digital I/O Module - Expansion Solution

The OleumTech® Digital I/O Module is designed for easily expanding discrete inputs and outputs to the DH1 Base Unit Wireless Gateway. Each channel can be independently software-configured as input, counter, output, or pulsed output. The Module supports any mix of inputs and outputs.

DLT 2.0 Differential Level Transmitter

Simple solution for barscreen level control at wastewater treatment plants, headworks, pump stations and combined sewer systems. Install a sensor on each side of mechanical barscreen to continuously monitor, transmit and control level. Built in control relays or 4-20mA outputs automatically activate the barscreen rake at preset levels.

E9000 Evolution Motor Control Centers

Since 1948, ABB has driven the development of Motor Control Centers, from the first plug-in combination starter to the first fully segregated units to contain fault damage. Evolution's 850A Vertical Bus, Snap-In Shelves, Plug-In Feeders to 600A, and Plug-In Starters to Size 5 provide customers with more flexibility to move buckets around and ad them in the future.

Easidew PRO I.S - Transmitter for Moisture Analysis

The Micehll Easidew PRO I.S. transmitter is a reliable and accurate 2-wire dew-point transmitter for trace moisture measurement in a wide range of gas and liquid process applications. Tough and durable, with global certifications and approvals, it is suitable for natural gas, petrochemical and refinery applications.

Entelliguard G Circuit Breakers

EntelliGuard G breakers are the newest line of GE low-voltage circuit breakers, the next step in the evolution of a line known for its exceptional reliability and performance. They are available in 3- and 4-pole designs rated from 400A to 6000A, with fault interruption ratings up to 200kAIC.

ExResistTel Explosion-proof Robust Telephone

FHF Safety Products’ Ex-ResistTel has been developed specifically for the harsh environments found in the process industries – for on-shore chemical & petrochemical plants, off-shore platforms, in mills and in harbors. The telephone can handle large temp differences, exposure to sea water and dust, as well as heavy mechanical wear and tear.

FH83NEO - Ultrasonic Solution for Industrial Liquid Measurement

The Faure Herman FH8300 Neo Ultrasonic Flowmeter is designed to measure both conductive & non-conductive liquids.

FHF BLE 15 Weatherproof Strobe Light

FHF BLE 15 Strobe Light is designed for warning and signalling purposes in indoor & outdoor facilities. The housing of the BLE 15 consists of grey, impact-resistant plastic fitted with an impact-resistant dome which is available in different colours.

Flame Detector - FV-40

Detectors offer a smart, flexible solution for any facility where the presence of flames poses a hazard. Facility personnel can choose between Single IR, Triple IR (IR3), Multi IR, UV, UV/IR2.5μm, UV/IR4.5μm and Ultra-Fast UV/IR detectors.

Flow Totalizer (FT1)

OleumTech's FT1 Wireless Flow Totalizer Transmitter is designed to work with virtually any third-party flow turbine meters for accumulating volume of liquid with high accuracy of ±0.01 %. Users have the ability to set the contract hour and set the flow rate to per second, minute, hour, or day. Users can also match the k factor and k factor units and display the volume output in barrels, liters, gallons, or cubic meters.

FlowCERT-Open Channel Flow Meter

The FlowCERT open channel flow meter provides comprehensive flow monitoring with data logging and control functions. It is compatible with a range of sensors to create a flow metering system for any application.

FML250 Liquid Flow Monitor

Designed specifically for liquid applications to accurately compute and display actual flow parameters. FML250 monitor is front keypad programmable, features an LCD display, and allows for 2-40 point linearization for enhanced metering accuracy

GASMAX EC Loop-Powered Gas Monitor for Toxic Applications

The GASMAX / EC single channel Toxic / Oxygen gas monitor delivers the latest in loop-powered gas detection technology, reliability and ease of use. The GASMAX / EC is CSA certified for use in Div 1 & Div 2 explosion proof installations and intrinsically safe installations with a barrier.

GASMAX II Single/Dual Channel Toxic and Combustible Gas Monitor for Hazardous Locations

The GASMAX II single / dual channel Toxic / O2 / LEL gas monitor delivers the latest gas detection technology, reliability and ease of use. Available in both single and dual channel models, the GASMAX II is CSA certified for use in Div 1 & Div 2 applications.

GASMAX II Volatile Organic Compounds Gas Monitor

Volatile organic compounds are emitted as gases from certain solids or liquids, including paints and lacquers, cleaning products, to name a few. Some VOCs, such as Benzene, are also considered carcinogenic. GDS corp Photoionization Detectors, or PIDs, detect these compounds using high energy ultraviolet light and measuring the resulting flow of electrons.

GD1 H2S Laser Line of Sight Gas Detector

The GD1 uses a tuneable laser diode to deliver enhanced coverage and fail safe H2S detection. Designed to work in a wide range of industrial environments from offshore production facilities to wastewater treatment plants, the GD1 needs no recalibration and can replace multiple standard detectors to cover the same risk.

GD10P IR point Gas Detector

The GD10P detector is the benchmark for combustible gas detection with NO FIELD CALIBRATION required. The IR gas detector differs from all other models, because it uses a silicon based solid-state IR source. The complete design is so stable that an ultra fast speed of response can be achieved whilst providing unparalleled service life and detector stability.

GD10PE IR Extended Point Gas Detector

The GD10PE is designed for applications involving large volumes of air with high velocity. With a measuring range of 0-20% LEL the GD10PE is 5 times more sensitive than standard point detectors. The GD10PE requires no field recalibration, thus saving on maintenance and service costs.

GDS-49 Gas Sensor Transmitter

The GDS-49 is a 2-wire 4-20mA Sensor Transmitter that accepts low power toxic or oxygen electrochemical sensor modules and functions in a 2-wire 4-20mA "sink" mode to transmit gas values to an appropriate receiver device. The GDS-49 is CSA approved for use in Div 1 & 2 explosion proof installations.

GDS-58NXP

The GDS-58NXP sample draw features the new GASMAX CX gas monitor with DigitalSensor technology & advanced Ethernet / MODBUS communications. GASMAX CX dual channel gas monitor supports new GDS Corp Digital Sensors for toxic and combustible gases as well as volatile organics and inert gases, such as CO2. Together with a fully integrated long life brushless sample pump, adjustable flow meter and low flow warning switch.

GDS-68XP

The GDS-68XP contains a microprocessor controlled sequencer that manages the sample / purge cycle and maintains the sampled output during purge air operation. An integrated GASMAX CX gas monitor provides the sensor interface and signal conditioning, calibration, continuous reading display and optional alarm relays with dual MODBUS slave interface.

GPR-2800 - Process Oxygen Analyzer for Hazardous Areas

The AII GPR-2800 series of process oxygen analyzers allows measurements of 0-1 up to 0-25% O2 in hazardous areas. Combined with modular sample system, this O2 analyzer will suit most applications for process customers around the world. The industry proven quality of our electrochemical oxygen sensors ensures reliable oxygen content measurements even with high carbon dioxide backgrounds.

HA Series Turbine Flow Meter

Our High Accuracy turbine flow meters are built with extremely tight tolerances only achievable with our precision manufacturing processes, stringent quality control, and in-house calibration capabilities. Specifically engineered to meet the strict standards required for custody transfer, the High Accuracy Meter delivers +/- 0.5% or better accuracy and +/- 0.1% repeatability for low viscosity applications.

HD1 Range - HEAT DETECTOR

The HD1 heat detector has been designed for use in hazardous environments. These units are suitable for fire alarm and/or suppression systems in offshore and onshore applications including paint spray booths, flammable material stores, turbine rooms, extract ductwork and other hazardous areas.

HELIFLU™ TCX Turbine Flowmeter, Process Measurement for Light to Medium Viscosity

The HELIFLU™ TCX product line covers a wide range of applications and is suitable for process and fiscal metering applications (with an accuracy range from +/- 0.15% to +/-0.50% and a viscosity range from 0.2 to 75 cSt).

HELIFLU™ TLM The Compact Helical Turbine Flow Meter for Liquid Hydrocarbon Measurement

The Heliflu™ TLM flowmeter is designed for high accuracy measurement of low to medium viscosity liquids and refined products. Meter installations and custody transfer operations are improved by the unique weight and space saving design which includes integrated flow conditioning.

HF5 - High End Humidity Transmitter

The Rotronic HygroFlex5 series is compatible with HC2A probes which offers a high variety in temperature ranges, accuracy and body types. This device generation boasts a unique calibration and adjustment process, as well as many other useful innovations. The HF5 Humidity and Temperature Transmitters are available as wall and duct mount versions.

HF5-EX - ATEX Humidity and Temperature Transmitter

The Rotronic HygroFlex5-EX series consists of two-channel transmitters for the exact measurement of humidity and temperature in explosive atmospheres. This device conforms to the latest international standards, the robust aluminum HF5-EX humidity and temperature transmitters are available with or without display. The attached probes are cast into a stainless steel tube and are certified for operation in explosive atmospheres.

HP Series Turbine Flow Meter

The HP Series: High Pressure Liquid Turbine Flow Meter offers all stainless steel precision machined components with CD4MCu and/or 416 stainless steel rotor.

Hydrogen Sulfide (H2S) Gas Detection Transmitter

OleumTech's H Series Hydrogen Sulfide (H2S) Gas Detection Transmitter is an RS485 Modbus interface solution for continuously monitoring air quality and generating alarms when H2S concentration levels exceed user configured setpoints to ensure a safe working environment.

HygroPalm HP31 | HP32 - Handheld Device

The Rotroinic HygroPalm HP32 is a versatile handheld instrument compatible with all HC2A and HC2 probes, it is able to perform spot measurements and logging of relative humidity, temperature and psychrometric parameters.

IMP Lite Ultrasonic level sensor

IMP Lite Lower-cost alternative to IMP+ for level measurement. Just like the IMP+, the IMP lite can be used wherever a reliable non-contacting ultrasonic level measurement and digital echo processing is needed. Also, recomnded for for slurries or liquids. Analogue output to interface with site control system or drive a display.

IMP+ Ultrasonic level sensor

IMP+ can be used wherever reliable non-contacting ultrasonic level measurement and digital echo processing is needed. IMP+ is recomended for slurries or liquids. Analogue output to interface with site control system or drive a display.

Installed SLGM0200L Slim Line Meter

The SLGM Series turbine flow meter delivers accurate measurement in a variety of applications, including oil & gas. This durable, compact design meter is specifically engineered to withstand rugged conditions and delivers accurate results while sustaining the same long service life as our full-sized turbine meters.The SLGM Series is a specialized slim design meter that allows for the removal of all internal parts as a single unit. Designed for installation between two flanges, the SLGM Series utilizes a significantly more robust rotor and support assembly than those found in competing products. The SLGM Series can be flexibly positioned in a variety of thin line piping applications and delivers +/- 1.0% standard accuracy over the flow range.

IO Max (MX1) Multi-I/O Wireless Transmitter

IO MAX is one of many Wireless Transmitters that communicates with an OleumTech Wireless Gateway within its network, creating a highly scalable network, accommodating virtually any I/O requirement.

ISM 5.0 Insertion Magmeter

The Accurate, Low Cost Alternative to Full-bore Magnetic Flow Meters. Measure flow of water and conductive liquids in full pipes from 3 to 72" (80 to 1800 mm) diameter. The dual pair electrode sensor inserts through a tap in the pipe wall. It can be easily installed in new pipe systems or by hot tap in pressurized pipes with flowing liquids. There are no moving parts so obstruction to flow and pressure drop is minimal.

iTrans2 Infrared Gas Sensor

The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head. With the optional HART Communication Protocol, iTrans2 offers remote diagnostics, set-up or calibration.

LD15 Range - High Intensity LED Beacon

LD15 certified LED Beacons have been designed for use in potentially explosive atmospheres and harsh environmental conditions. Incorporating a low maintenance, innovative LED array, allows the LD15 to have life of up to 54,000 hours. The low current consumption design allows an energy efficient solution without compromising light output.

Limitamp Medium Voltage Motor Control Centers

The Limitamp motor control center provides an economical means of centralizing motor starters and related control equipment. It permits motor control starters, feeders, isolator switches, distribution transformers, and more devices to be obtained in a single floor-mounted structural assembly fed from a common enclosed main bus.

Lineator Advanced Universal Harmonic Filter

The LINEATOR Advanced Universal Harmonic Filter (AUHF) is a revolutionary advancement in the area of passive harmonic mitigation. When your application calls for a truly cost effective harmonic solution, the LINEATOR AUHF provides Engineers with a standard off-the-shelf solution for what used to be a very challenging engineering problem.

LIT25 Level Indicating Transmitter

The LIT25 continuously measures, displays, and transmits level in tanks and lagoons, or anywhere you require a level sensor. Includes a non-contacting ultrasonic sensor which is rated Intrinsically safe, a compact watertight electronics/display enclosure, 4-20mA output, backlit LCD display, control relay and simple built-in menu/calibration system.

Low and Medium Voltage Switchgear

ABB Switchgear products include options for low voltage and medium voltage switchgear. Comprised of electrical disconnect switches, fuses or circuit breakers used to control, protect, and isolate electrical equipment.

MantaRay Portable Area-Velocity Flow Meter

Measures flow in open channels, partially filled and surcharged pipes using an ultrasonic sensor. It's designed for monitoring stormwater, sewage, industrial effluent, irrigation water and natural streams. The MantaRay displays and datalogs flow rate and total flow and connects to samplers, SCADA and telemetry systems.

MEDC SL15 Status Lamp

These Status Lights have been designed for use in potentially explosive atmospheres and harsh environmental conditions. The indicators are suitable for use offshore or onshore, where a high degree of corrosion resistance is required. Units can be painted to customer specification and supplied with identification labels.

Meridian Universal Gas Detector

Meridian’s single detector head supports combustible and toxic sensors. Designed for ease of use, Meridian significantly reduces upfront investment and ongoing maintenance costs. With global approvals and SIL2 certification from TUV-Rheinland, Meridian ensures best in class performance and safety.

Motors - ABB Pump Motors

ABB’s pump line of motors includes single or three phase jet pump motors, square flange motors, close-coupled pump motors, and P-Base vertical solid shaft pump motors. The motors are stocked in totally enclosed fan cooled, open drip proof, and many explosion proof ratings. Applications for these run the gamut from swimming pool pumps to medium and high thrust in-line pumps used in water treatment plants. Sizes ranges from 0.25 - 56 kW (1/3 - 75 HP).

MultiFlame DF-TV7-T Multi-spectrum Flame Detector

The DF-TV7–T multi-spectrum infrared flame detector uses three wavelengths to detect hydrocarbon fires and is the right choice for operation in dirty environments or for detection of smoky fires. The DF-TV7–T is designed to respond to unwanted hydrocarbon fires, whilst maintaining a high degree of false alarm immunity.

MultiFlame DF-TV7-V Multi-spectrum UV/2IR Flame Detector

The DF-TV7–V is a combined ultraviolet / infrared flamedetector offering excellent flame detection whilst maintaining outstanding false alarm immunity. The DF-TV7–V is designed to respond to unwanted hydrocarbon fires, whilst maintaining a high degree of false alarm immunity.

Multivariable Transmitter

OleumTech's H Series Multivariable Transmitter is a versatile 3-in-1 instrument designed to deliver precise measurements of both differential and static absolute pressure (high side) along with process temperature through an external PT100 ohm RTD sensor (4-wire). The MVS Transmitter supports RS485 Modbus and is easy to install and operate since it effortlessly integrates with popular third-party flow computers.

MX32

The MX 32 is a compact, low-profile controller that continuously monitors gas detection, including 4-20 input mA, dry logic input, MODBUS RS485 signal from compatible detectors.

MX43

The MX 43 gas detector manages both digital lines and analog channels, as well covers all needs for a wide variety of gas monitoring applications. Digital technology allows up to 32 detectors to be distributed on 8 lines for increased cost savings.

OCF 6.1 Open Channel Flow Monitor

The Greyline OCF 6.1 Open Channel Flow & Tank Level Meter is a perfect solution for your non-contacting measurement needs. New features of the OCF 6.1, replacing the OCF 5.0 Open Channel Flow Meter and SLT 5.0 Level Tank Monitor. Continuously monitor, display, totalize and data log flow and level through any flume or weir.

OLCT 200 Gas Detection Transmitter

The OLCT 200 can be configured to meet nearly any application through its features and options, including a Wireless option. Designed to offer convenient features and ease of use.

OTC Wireless Discrete Transmitter

OleumTech's OTC Wireless Discrete Transmitter features two discrete inputs for connecting to dry contact or open-drain output/NPN sources for notifying state changes. Field-proven wireless transmitter communicates with an assigned wireless gateway within the OTC Wireless Sensor and I/O Network creating a highly scalable network, accommodating virtually any I/O requirement.

OTC Wireless Hydrostatic Level Transmitters

Level Transmitters measure level by monitoring pressure at the bottom point of vented top mount tanks, deep wells, water towers, rivers, and lakes. WT-LL4 direct mount version includes a specified length hydrostatic pressure sensor and direct mounting solution while the WT-LL5 allows users to select their own sensor and mounting method.

OTC Wireless Thermocouple Transmitter

The OleumTech's “TC1” Thermocouple Transmitter supports third-party type K thermocouple sensors for monitoring extreme heat process conditions including flare, kilns, and gas turbines. The TC1 Transmitter features 24-bit analog to digital conversion (ADC) and provides a reliable method of measuring temperature.

Panelboards

From design through manufacture and delivery, ABB commits its considerable resources to giving our panelboard customers the products they need, when they need them. ABB Panelboards options include power and lighting, generator connection, and bypass isolation. Product offerings include ReliaGear neXT Power panels, ReliaGear Lighting panelboards, A Series II panelboards, Proline panelboards, and Spectra series power panelboards.

PD663 ProtEX-Lite EXPLOSION-PROOF LOOP-POWERED METER

The PD663 is a rugged, explosion-proof NEMA 4X loop-powered meter perfect for applications where a simple, inexpensive display is required in a hazardous area. Power is derived soley from the 4-20 mA loop meaning that there is no need for additional wiring or batteries that need to be changed.

PD6830 ProtEX-RTP PULSE INPUT RATE/TOTALIZER

The ProtEX-RTP PD6830 Explosion-Proof Rate/Totalizer brings modern design, easy readability, and enhanced functionality to hazardous areas in a way never seen before. The PD6830 meter has a display that provides the important information about the process, can be seen under various lighting conditions, from wide angles, and from a distance.

PDFM 5.1 Portable Doppler Flow Meter

It's ideal for flow troubleshooting, balancing and checking performance of permanent flow meters. Fast and easy to operate – you can mount the sensor on the outside of a pipe in less than a minute. Works on any liquid containing bubbles or solids and is recommended for "difficult liquids" like wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. Learn more...

PH1 Fire Alarm Call Points

The PH1 is a double action pull handle call point designed for use in Class 1 and Zone 1/Div 1 areas. The large "Lift" and "Pull" GRP handles can be operated effortlessly whilst wearing industrial gloves and require double action to alarm, preventing accidental activation. The PH1 operates in the harshest environments with a temp rating of -50 to +70 deg Celsius.

PH1 Pneumatic Horn

Pneumatic horns are used wherever extremely loud signals are required and there is no power supply available. One possible application is in railway track construction to warn personnel of approaching trains. Since the signal has to travel long distances, the maximum volume of the PH 1 pneumatic horn of approximately 135 dB(A) is needed here.

Plant Evacuation Electric Horn

Designed to not only meet the most stringent Life Safety requirements, but also provide you with industry-leading intelligible voice communications for Wide-Area Mass Notification. Can be integrated with your existing audio source, providing a simple upgrade path to expand emergency communications coverage to outdoor areas.

Process Stream Monitor

The CPGD10-100V Methane Sensing System is custom designed to continuously monitor an incoming gas sample for Methane, often replacing traditional Oxygen Sensing Systems on Vacuum Screw Compressors. This system responds quickly while providing unparalled service life and detector stability. No calibration required.

Process Stream Monitor

The CPGD10-5V Biogas Sensing System is custom designed to continuously monitor an incoming gas sample of Biogas. Typical system components often include H2S monitoring, CO2 monitoring, Dew Point monitoring, O2 monitoring and Methane monitoring. This system responds quickly while providing unparalled service life and detector stability.

PSL 5.0 Hybrid Pump Station Level Controller

Designed for pump stations, wet wells and tank level control, the Greyline PSL5.0 includes 6 control relays for pump control, alternation, level alarms, dialers or fault alarms. It features a non-contacting ultrasonic level sensor plus redundant sensing with connection of any 4-20mA level sensor. The PSL5.0 automatically stores relay run time reports for pump performance.

PTFM 6.1 Portable Ultrasonic Transit Time Flow Meter

With New, more powerful signal processing hardware, and three interchangeable, non-invasive transducer sizes optimized for a wide range of pipe sizes and materials. The PTFM 6.1 from Pulsar is here to help by providing accurate, non-invasive flow measurement in the most challenging industrial environments and applications, with minimal installation complexity and costs.

Pulsar Guard

The Pulsar Guard acoustic sensor range offers reliable solids flow detection. It detects and reacts instantly to changes in solids flow and warns of blockages and foreign object detection, high flow, low flow or no flow conditions and can detect pigs within the process.

QC Series: Quick Change Turbine Flow Meter

The Quick Change Meter allows for quick replacement of the internal components, without the need to remove the entire meter from its installation point – allowing customers to maintain process efficiency and accuracy with minimal downtime, mitigating an opportunity for pipeline shift. The meter’s unique body allows it to handle working pressures up to 1,500 psig.

REFLECT 2-Wire Radar Level Sensor

Provides accurate level or volume monitoring of liquids & solids in critical measurement applications; no routine servicing required, withstand the harshest environments while maintaining accuracy in the presence of dust, temperature, moisture, pressure, & chemicals. The REFLECT™ 2-wire radar sensor uses a web-based app to give an easy & convenient way for you to change parameters, access trend reports, & view echo traces.

ResistTel IP2 Voice over IP Telephone

FHF Safety Products’ ResistTel IP2 Industrial VOIP telephone has been developed specifically for harsh environments where there is large temperature differences, high humidity, exposure to sea water and dust. SIP for Industrial SIP Phones or H323 protocol included, Fully configurable through any internet browser or the on-board display, POE or external.

ResistTel Robust Telephone

The world’s only industrial telephone with a stainless steel keypad that has passed UL’s stringent Type 4x salt spray test (100 psi / 7 bar) on the housing and the keypad. Robust glass fiber reinforced polymer housing is resistant to acids, sea water, alkali, moisture and grease and requires no additional enclosure for its Type 4X / IP66 rating.

RetroFit Kits

All internal components for any series turbine, standard and heavy duty options available to install in the field to avoid costly delays returning meters repair. All kits are calibrated.

RS485 Resistive Tank Level Sensors

OleumTech’s Resistive Level Sensors level monitoring solution that offers industry-leading 5-in-1 monitoring capabilities: product (oil), interface (water), the temperature, along with two discrete inputs for connecting to dry contact sources. HW-RL3-LCD also has the ability to calculate and report volume and tank full percentage data.

RTD (RT1 & RT2) Wireless Temperature Sensor/Transmitter

RT1 & RT2 are ideal for monitoring air, gas, water, or liquid temperatures with high accuracy of ±0.1 °C. The RT1 direct mount version includes a 4-wire Platinum 100 ohm sensor where users can select the length ranging from 2 to 18 inches. It supports temperature ranging from -65 °F to 500 °F (-55 °C to 260 °C).

RTD Temperature Transmitter

The HRTD is ideal for hazardous locations thanks to its Explosion-proof, Class I, Division 1 design. OleumTech's H Series RTD Temperature Transmitter provides high accuracy and stability and is available with either 4-20 mA, 4-20 mA/HART, or RS485 Modbus output signal option while offering IP67 protection.

SafEye - Open Path Combustible Gas Detector

The SafEye Open Path Detector is an innovative, next generation solution to open path combustible gas detection. It can replace multiple point detectors, detects multiple gases at once, and is durable, proving to be a smart, cost efficient choice for combustible gas detection

SCADADROID R2 Alarm Dialer

SCADADroid is easily configured to use VPN to allow quick and easy remote communications. Once connected, the SCADADroid is accessible for viewing and collecting data remotely, such as on a SCADA system. Remote programming and troubleshooting of PLCs is also possible, potentially eliminating travel time for enhancements, diagnostics and correction of programming issues. On alarm condition the ScadaDroid can be set up to phone, text or email you notifications.

Security Camera

The MCS8 Camera Station has been designed specifically for use within harsh & demanding environmental conditions. A vari-focal lens as standard, a variety of mounting brackets and wiper/washer tank options provides the capability for most demanding CCTV applications.

SF60 HD IP Series - UL Range

The Oxalis SF60 is a fixed camera housing for use in onshore, offshore, marine and heavy industrial environments. The large format housing allows the installation of customised equipment (subject to conformity) The camera housings are designed specifically for the Americas markets or where UL ordinary location standards have been specified and as a result they utilise NPT entries as standard to maximise compatibility with existing installations.

SFM 6.1 Ultrasonic Slurry Flow Meter

Non-contacting flow monitoring specifically designed for limestone slurry, fly ash slurry, gypsum slurry and many others. The Sensor is mounted on the outside of the pipe so it is unaffected by abrasive slurries or harsh chemicals. There is no obstruction to flow and no pressure drop.

Sludge Finder 2

Pulsar’s Sludge Finder 2 is a controller and transducer system that provides reliable continuous sludge blanket level measurement. Used in thousands of applications worldwide for detecting sludge blanket levels or settlement tanks.

SM87 PB Fire Alarm Call Points

The SM87 PB Fire Alarm Call Points are designed for use in Class 1, Zone 1 and Class 1, Division 1 areas. A choice of either stainless steel or alloy makes the range suitable for either the offshore or onshore industries. Units have ULC approval for Fire Panels and are rated down to minus 50 degree Celsius.

Smart Gauge Pressure Transmitter (HGPT)

Smart Pressure Transmitter is designed for use in rigorous industrial applications with robust resistance to chemical exposures, mechanical loads, and EMI. It is easy to install and operate. The OleumTech H Series Smart Pressure Transmitter is a natural choice for a wide variety of oil, gas, water, wastewater, and other mission-critical applications that require a high level of accuracy and reliability.

SP40 HD IP Series - UL Range

The Oxalis SP40 is a PTZ camera station for use in onshore, offshore, marine and heavy industrial environments. The camera housings are designed specifically for the Americas markets or where UL ordinary location standards have been specified. The base unit carries dual NPT cable entries with easy access for cable termination during installation as standard, maximising compatibility and ease of use with existing installations.

Spyglass - Fast, Reliable & Efficient Detection

Spyglass family of triple IR & UV-IR flame detectors provide top-tier optical flame detection with faster time & performance over long distances. Superior performance for a wide variety of fires. All flame detectors are available with built-in high definition video, which allows users to make critical safety decisions from a distance.

ST40 HD IP Series - UL Range

The Oxalis ST40 is a twin PTZ camera station with the addition of a high efficiency automated integral LED illuminator for use in onshore, offshore, marine and heavy industrial environments. The camera housings are designed specifically for the Americas markets or where UL ordinary location standards have been specified. The base unit carries dual NPT cable entries with easy access for cable termination during installation as standard, maximising compatibility and ease of use with existing installations.

Stingray 2.0 Portable Level-Velocity Logger

For flow surveys in open channels and partially filled pipes. The sealed ultrasonic sensor mounts on the bottom of the pipe or channel. Stingray operates on standard Alkaline D-cell batteries for up to four years. The built in 130,000 point datalogger stores level, velocity and temperature readings at programmable intervals. Logger software included.

Tank Level Switch

Float Type Level Switch by OleumTech, is designed to be mounted on the top of a liquid storage tank and is used for detecting critical overfill conditions for high level alarm, monitoring, and control applications. The level switch can be ordered with a single or dual actuation switching option along with customizable set points.

TM Series Turbine Flow Meter

The TM Series features our same ruggedized, stainless steel construction with CD4MCu and/or 416 stainless steel rotors, line sizes from 3/8 inch through 10.0 inch to fit various application requirements. End connection is NPT threaded standard, however victaulic, flanged, or sanitary ends are available.

TMC Series Cryogenic Flow Meters

Upstream and downstream flared transition piping is available for all end fittings. For enhanced accuracy flow straighteners can be installed in the upstream section of pipe.

TMdrive-70e2

Provides accurate speed control and high efficiency while eliminating the need for high maintenance mechanical flow control devices. Its rugged design is suited for induction or synchronous motors using advanced, fully digitalized vector controlled three-level Pulse Width Modulation (PWM). Flexible arrangement of converter, inverter, and cooling units provides high-power density in a very small floor space with lower installation costs.

TMdrive-MVe2TM - Medium Voltage

Designed for high-efficiency and power-friendly operations in a broad range of industrial applications. High reliability, low harmonics distortion, regenerative operation and reactive power control operation are designed into the drive. Energy regeneration capability is included, allowing braking of overhauling loads and rapid stopping of loads such as fans and pumps.

TMdrive-MVG2 - Medium Voltage

Designed for high-efficiency and power-friendly operation in a broad range of industrial applications. High reliability, low harmonic distortion, and high power factor operation are designed into the drive

TMX Corrosive Liquid Flow Meter

Designed specifically for corrosive applications, the TMX Corrosive Series provides highly accurate measurement in rugged conditions, durability and longevity when only the most reliable equipment will suffice.

TTFM 6.1 Transit Time Flow Meter

Accurately measure the flow rate of relatively clean, non-aerated liquids like potable water, raw water, cooling water, de-ionized or reverse-osmosis water, oils and chemicals in full pipes. Ultrasonic transducers mount on the outside of a pipe without shutting down flow. Flow rate is displayed on the large, backlit display, along with total volume, signal strength, relay status, and other diagnostic values.

Tuning Level Switches

OleumTech's H Series Tuning Forks, designed based on the tuning fork principle for providing point level detection for alarm, monitoring, and control applications. When in air, the tuning fork vibrates at its natural frequency, but when immersed in a particular medium, the frequency drops & provides an output state change.

TZN Helical Turbine Flowmeter for Custody Transfer Measurement

TZN provides high accuracy measurement for a variety of liquids, from very light LPG products to heavy crude oil. This Helical Turbine meter design is suitable for use in the most severe environments & process conditions while maintaining accuracy better than plus or minus 0.15%, even in changing solutions. Low pressure drop due to the helical rotor design.

Ultra 4

Ultra 4 offers the sophistication and advanced features of the rest of the Ultra range in a compact, cost-effective package and useful new features. Offering 4 alarm or control relays (3 x SPCO isolated and 1 x SPNO solid state) and a multifunctional display.

Ultra 5

Ultra 5 provides flexible and reliable non-contacting ultrasonic level and volume measurement. Featuring five control relays and a measurement range from 125mm to 40m. Available as a wall, panel, fascia or 19" rack mount.

Ultrasonic dB Transducer Series

The dB Transducer Series is a range of non-contacting ultrasonic transducers for level, volume and flow measurement. Available in a variety of models and compatible with all Pulsar controllers.

UltraTWIN

UltraTWIN Twin-channel ultrasonic measurement with the ability to combine applications. Compatiable with the full range of dB Transducers. UltraTWIN features six relays configurable to either channel.

Wireless Analog Input Module

OleumTech's Wireless Analog Input Module is designed to monitor analog processes without trenching or running conduit and wiring for fast commissioning. This Module provides a quick and scalable solution for adding analog input points in any OTC Sensor Network.

Wireless Analog/Discrete (AD1)

The OleumTech® AD1 Wireless Pressure Gauge Transmitter is designed for connecting up to three 0-5 VDC pressure gauges or analog sensors, providing high resolution 24-bit analog to digital conversion (ADC). The Transmitter provides up to 9.5 VDC to each analog output source. The AD1 has the ability of calibrating zero and max points. It provides removable wiring terminal blocks in its junction box housing to facilitate the wiring process.

Wireless Digital I/O Module

The OleumTech® Wireless Digital I/O Module is designed to accommodate various input and output signal needs without permitting, trenching or running conduit for fast commissioning. This Module provides a quick and scalable solution for expanding digital I/O points in any OTC Sensor Network. The Digital I/O Module supports any mix of inputs and outputs with six digital channels that can be independently configure via BreeZ® Software.

Wireless Discrete (DS1)

The OleumTech® Wireless Discrete Transmitter with local display features two discrete (digital) inputs for connecting to a dry contact or open-drain output/NPN source for notifying state changes. This input can be set for normally open or normally closed. The Transmitter can also report transition counts. The DS1 utilizes on-delay exception reporting method and users can set the debounce filter ranging from 20 ms to 2000 ms to control just when the state change occurs.

Wireless Multi-I/O Module

The OleumTech® Wireless Multi-I/O Module is designed to solve various input and output signal challenges without trenching or running conduit and wiring for fast commissioning. This Module provides a quick and scalable solution for expanding digital I/O points in any OTC Sensor Network. This Multi-I/O Module is equipped with four high resolution analog inputs (24-bit ADC). Each input can be independently selected for either 0-10 V or 4-20 mA mode of operation.

WM Series Turbine Flow Meter

The WM Series: Liquid Wafer Style Turbine Flow Meter offers all stainless steel precision machined components with CD4MCu and/or 416 stainless steel rotors in line sizes from 3/8 inch through 8.0 inch. Wafer-style refers to meters that are installed between existing process piping flanges.

XB12 Range - 21 JOULE XENON STROBES

XB12 Strobes are high output certified beacons designed for use in potentially explosive atmospheres. The beacon housing is manufactured from a UV stable, glass reinforced polyester. Stainless screws & mounting bracket are used ensuring a totally corrosion free product. Units can be painted to customer specification and supplied with identification labels.

XB15 Range - 15 Joules Xenon Strobes

XB15 strobes have been designed for use in hazardous locations. They are lightweight and can be customized to suite any environment including onshore or offshore areas. Common features are ULC listing for Fire Panels, -55 to +70 Degrees Celsius temperature ranges, multiple color lens available as well as customizable flash rates.

XB16 Range - STROBE WARNING LIGHT

XB16 strobes have been designed for use in Class 1, Division 2 hazardous locations. They are lightweight and can be customized to suite any environment including onshore or offshore areas. The XB16 can be configured with a variety of lens colors as well as voltage configurations. Optional Lens Guards can also be fitted on these units.

XF60 HD IP Series - UL Range

The Oxalis XF60 is an explosion protected fixed camera housing for use in hazardous areas inonshore, offshore, marine and heavy industrial environments. The large format housing allows the installation of customised equipment (subject to conformity). The camera housings are designed specifically for the Americas markets or where UL standards on Class and Division have been specified. The camera utilises NPTs entries as standard to maximise compatibility with existing fixed conduit installations.

XP40 HD IP Series - UL Range

The Oxalis XP40 is an explosion protected PTZ camera station for use in hazardous areas in onshore, offshore, marine and heavy industrial environments. The base unit carries dual NPT cable entries with easy access for cable termination during installation as standard, maximizing compatibility and ease of use with existing fixed conduit installations. Camera stations are designed and manufactured for longevity in harsh environments, require minimal maintenance and are fully certified to UL standards as required by OSHA in both safe and hazardous areas.

XT40 HD IP Series - UL Range

The Oxalis XT40 is an explosion protected twin PTZ camera station with the addition of a high efficiency automated integral LED illuminator for use in hazardous areas in onshore, offshore, marine and heavy industrial environments. The base unit carries dual NPT cable entries with easy access for cable termination during installation as standard, maximising compatibility and ease of use with existing fixed conduit installations.

XTC601 - Binary Gas Analyzer for Hydrogen Monitoring

A robust, linear & stable thermal conductivity analyzer for measurement of binary gas mixes such as air in hydrogen, nitrogen, argon, helium or carbon-dioxide. The sensor is housed in a rugged casing, making it suitable for a wide range of applications. The analyzer can be supplied explosion-proof and suitable for hazardous areas.

XTP601 - Oxygen Analyzer

The XTP601 Oxygen Analyzer for safe or hazardous areas is a robust, linear and stable device that is used for measurements in gases such as biogas, methane, hydrogen, nitrogen or carbon dioxide. The analyzer is housed in an IP66 rugged casing, making it suitable for a wide range of applications. The XTP601 can be supplied with flame arrestors, as either explosion-proof and certified for use in hazardous areas or for use with flammable gases in a safe area.